Jul 11, 2018 | Press Releases
Orascoptic produces some of the most reliable LEDs. Such as: Apollo, Discovery, & Endeavour models. These models use metal housings as opposed to less expensive plastic. Orascoptic Apollo, Discovery, Endeavour Repair is our specialty.
Over time, even the finest devices can have certain components simply wear out. From not only normal use but accidental events. For instance, cables, jacks, connectors & internal batteries are common replacement candidates. We stock most common components for Orascoptic devices.
Some failures occur slowly over a long period of time. Others happen without warning.
Being without an LED that you have become dependent, can present a challenge. While a number take the inconvenience in stride. Others react impulsively. Some even end up wasting unnecessary money on a replacement. We think its a good idea to check your device on a regular basis so as to avoid any inconvenient surprises.
Use a reputable repair service as opposed to someone on an auction site. Some customers have complained when their unit is sent for a simple repair, such as a battery replacement, they are shocked to be told the unit needs much more. After sending the unit to us they were pleased to find out it was a simple battery replacement & nothing else.
Additional information can be found here
Common Cable Failure Causes:
- Hardening, cracking, brittle cables, as a result of age or improper cleaning.
- Accidental breakage. For example hooking a cable on something.
- Heat, usually generated by continued use of a thinning or failing cable.
- Non professional or mediocre repair, such as taping a problem area
Proper Cable Care:
- Using alcohol or similar solvents to clean a cable contributes to cracking in addition to deterioration. While It may clean the cable, it also dries it out, making it stiff and prone to cracking, On the other hand cleaning with mild hand soap and water can make them last a lot longer.
- Winding or twisting a cable tightly or knotting it is very harmful. Repeated tight coiling as opposed to loose rolling will diminished cable life.
Premium Cable Features:
- Conductors sized for proper operation is crucial, while at the same time offering improved reliability. Oxygen free copper, silver plated copper, as well as other premium conductors are the best choice
- Flexible jacket materials. Most newer cable coverings are made with advanced polymers, silicone or other quality materials proven to remain supple longer.
- Long wearing cables, for example: nylon reinforced or advanced material type. proven to remain flexible longer, unlike low quality counterparts.
In conclusion, superior replacement cables last. Therefore we can offer a full 5-year free repair, or replacement guarantee. Orascoptic Apollo, Discovery, Endeavour Repair is not only affordable, but fast.
Examples of some repairs are here. www.eagleoptical.com
Additional questions or concerns about our repair services can be found at eagleopticalproducts.com/wp/faqs/
Jul 3, 2013 | Press Releases, Uncategorized
Orascoptic LED headlight repair of Discovery, Endeavour, and Apollo LEDs are a service we perform routinely. As a result we have become very proficient. Generally taking two days or less from the time we get a device until the service is complete. We know your time is important.
Frequent cases can involve wiring damage near the battery pack, or the connector itself is the issue. A relatively quick & inexpensive repair. When the plug or jack is intact, repair is very straight forward. Many plugs contain very tiny contacts, despite this repair is not a problem.
We believe Orascoptic LED headlight repair is very worth while for quality units like Orascoptic’s Apollo, Discovery, Endeavour, Sunburst, and Zeon models considering of their reliability in addition to the high cost of a replacement unit.
Find additional information about orascoptic led repair at eagleopticalproducts.com/wp/faqs/
See our customers reviews & comments
Photos below show an actual jack in need of repair.
Connector contacts
Note the pin size & shape.
Our technicians have the equipment in addition to the skills necessary to diagnose as well and perform intricate repairs. Eagle Optical repairs all makes and models LEDs.
Further information about LED repair services available at Eagle Optical Products can be found HERE.
Jun 27, 2013 | Press Releases
PCB Repair
Connector Assembly
Many times Repair of Common LED Problems are usually due to a break or short in wiring wire between the LED and the battery pack. Adding a strain relief to prevent a recurrence of the same problem is an easy yet affordable improvement.
Frequent Causes
Most issues are not the fault of manufacturing defects, but rather an accident other unplanned event. If a unit falls on to a hard surface it can damage internal components, in spite of looking perfectly fine.
“Hooking” the cord on something or stretching it usually results in damage. LED cables are easy to snag.
Most times this potential problem can be minimized by keeping the cord underneath your lab coat. Using a twist tie to coil up excess slack is another good idea. Repairs of common LED issues can be avoided by proactively shortening the cable to suit your needs.
Repair costs
The majority of LED Light Repair for Common Problems are easily fixed, therefore very affordable, yet some are under the impression that repair of the unit is either not possible or expensive. The fact is while advances in technology are increasing, so are manufacturer’s desire to lower costs. One of the easiest ways to lower cost is to use cheap plastic components. Some of the most reliable LEDs have metal components which are far superior to low cost plastic. In most cases a repaired quality unit can outlast many current bargain models.
Find a reputable facility
Consider having your LED or Loupes repaired? Repairs for common LED issues need to be done by a reliable provider. Eagle Optical suggests you select a trustworthy repair facility with a reputation of standing behind their work, as well as offering a warranty. If time is a factor, ask the repair facility their turn around time. A reputable facility can quickly diagnose and restore your LED to like new function. Having an extensive parts inventory of most common repair parts is important.
At Eagle Optical Repair of Common LED Problems is an issue we face daily. We also have the ability to duplicate, or make from scratch for example parts that are no longer readily available.
Considering the lofty price of a new unit, you may want to look into an affordable repair. Even if you decide to spend the money for a new unit, isn’t it worth considering repairing your present LED for a “back-up”?
Most repairs are complete and shipped in less time than it takes to order & receive a new one.
https://eagleopticalproducts.com/wp/led-light-repair/
Sep 8, 2012 | Press Releases
Fix your loupes
Buy new loupes? or fix the ones you have?
My current loupes are near perfect and work fine. I need a small part installed, but when I contact the seller, they say, Sorry, We don’t do repairs or know anyplace that does, but we will be glad to sell you an expensive new set”.
Sound familiar? With high replacement cost and tight money, we hear this more and more. Eagle repairs most brands of Loupes, offering an affordable repair or refurbishment service for those who believe their loupes have a lot of life left in them.
Problems
With some loupes issues range from an inexpensive attaching part, however others as serious as a lens assembly. Many times these issues are repairable, despite what others tell you. Buy new loupes, or fix the ones you have?
Frames
Another dilemma can be the frames. at the same time your oculars and adjusting mechanism are fine, you probably just need them installed on new frames. We stock hundreds of frames in a variety of styles and colors. So if you need new frames, or just want a different look, Click here. We offer several attractive designer frame styles for optical loupes. Colors include dark blue, turquoise, bronze, plum, gold to name a few. The new designer frames incorporate head-hugger temples for greater comfort. Our new Designer frame line, compliments our best seller titanium frame.
For new frames visit eagleopticalproducts.com/wp/frames-for-loupes-2/
Contacting us
If your loupes have issues and you are interested in having them repaired, Please contact us. Typical turn around time is 2 days, (plus shipping time). We believe it’s a great alternative to the high cost of replacement.
If you don’t agree, call anyway, there’s a good possibility we may be interested in purchasing your damaged Loupes for parts.
We have repaired products from most manufacturers including, Designs for Vision, Eagle, Leica, Lumineer, Orascoptic, Surgitel, Zeiss, and more.
When repairs are complete we return ship your loupes via Fedex
Mar 8, 2006 | Press Releases
Eagle Optical offers several attractive replacement designer loupe frames . Colors include: dark blue, turquoise, bronze, plum, gold to name a few. The new designer frames incorporate head-hugger temples for greater comfort. For safety, snap-on side shields are included. These frames compliment our mainstay solid titanium frame which is a current best seller. By using these high quality designer frames the Medical Professional gets the best of both worlds rugged frames that are also stylish. Its no longer necessary to put up with broken or outdated frames when replacements are not only stylish but also affordable. As an alternative we also carry several Safety frame styles. All frames are available for immediate shipment. Money back guarantee.
